NICKEL ALLOY FILLER METALS We manufacture Nickel alloy wire products in diameters from 0.1 mm fine wire up to 20 mm dia. wire rod. These alloys are melted from raw materials and master alloys in accordance with our own chemical analysis specifications. Melting is performed either in an open electric furnace, or in a vacuum furnace. If required by the melt route, the alloy might then be re-melted by means of ESR or VAR technology and finally poured into the ingot mould or continuous casting apparatus. The subsequent hot forming processing of the ingots / electrodes to wire-rod either takes place in two stages via ingot hot-rolling and then billet hot-rolling or in a continuous process. The surface of the wire-rod is either chemically treated (pickled) or machined (peeled) and then the drawing processes are carried out with a combination of fine-tuned drawing steps and heat treatment procedures. We can supply large, medium or fine wire diameters in accordance with customer packaging requirements, such as in coils, on formers, in drums, on spools, or in straight cut lengths, with or without stamped and embossed ends.

镍基合金焊丝德镍（Deutsche Nickel)生产镍基合金线材，直径从0.1毫米细丝到20毫米的盘条。这些合金是按照我们自己的化学成分规范，从原材料和母合金中熔炼而成的。熔炼可在开放电炉或真空炉中进行。如果对熔炼有进一步需要，合金可通过ESR或VAR技术重新熔炼，最后倒入铸锭模或连续铸造设备中。接下来，将铸锭/电极棒进行热加工成盘条，可分为两个阶段，即先进行铸锭初轧成方坯，方坯再进行热轧成盘条，或采用连铸连轧生产盘条。盘条表面可进行化学处理（酸洗）或机械加工（剥皮），然后进行一系列精细的拉丝和热处理过程。我们可以根据客户的要求，对冷拉或退火后的线材成品进行包装，可以使用卷轴，桶罐，或者线卷托架。也可以定长直条切割、端部钢印。

参展商
Deutsche Nickel GmbH

My German Pavilion