NICKEL ALLOY FILLER METALS We manufacture Nickel alloy wire products in diameters from 0.1 mm fine wire up to 20 mm dia. wire rod. These alloys are melted from raw materials and master alloys in accordance with our own chemical analysis specifications. Melting is performed either in an open electric furnace, or in a vacuum furnace. If required by the melt route, the alloy might then be re-melted by means of ESR or VAR technology and finally poured into the ingot mould or continuous casting apparatus. The subsequent hot forming processing of the ingots / electrodes to wire-rod either takes place in two stages via ingot hot-rolling and then billet hot-rolling or in a continuous process. The surface of the wire-rod is either chemically treated (pickled) or machined (peeled) and then the drawing processes are carried out with a combination of fine-tuned drawing steps and heat treatment procedures. We can supply large, medium or fine wire diameters in accordance with customer packaging requirements, such as in coils, on formers, in drums, on spools, or in straight cut lengths, with or without stamped and embossed ends.

Exhibitor
Deutsche Nickel GmbH